Automatic bottle blow moulding machine is used to blow various calibers of hollow plastic containers, the machine structure design is reasonable, with small volume less energy consumption, easy to operate and maintain.
Technical parameters
Model | Item | AJR-2 | AJR-4 | AJR-6 | AJR-9 |
Productivity | Depend on bottle design | 1800-2500PCS/H | 4000-5000PCS/H | 5500-6500PCS/H | 8000-9200PCS/H |
Product type | Volume | 0.1-2.0L | 0.1-2.0L | 0.1-2.0L | 0.1-2.0L |
Body diameter | ≤100mm | ≤100mm | ≤100mm | ≤100mm | |
Height | ≤310mm | ≤310mm | ≤330mm | ≤330mm | |
Neck diameter | ≤38mm | ≤38mm | ≤38mm | ≤38mm | |
Mold | Cavity | 2 | 4 | 6 | 6 |
Mold thickness | 240mm | 240mm | 240mm | 240mm | |
Mold volume | 260*240*370mm | 510*240*360mm | 640*240*360mm | 640*240*360mm | |
Main machine power | Electrical source power | 380V/220V 50/60HZ | 380V/220V 50/60HZ | 380V/220V 50/60HZ | 380V/220V 560/60HZ |
3Phase | 3Phase | 3Phase | 3Phase | ||
Rated power | 25kw | 49kw | 73kw | 97kw | |
Really use power | 6.5kw | 13kw | 25kw | 38kw | |
Air system | HP air compressor | 1.6m³/min3.0Mpa | 3.0m³/min3.0Mpa | 6.0m³/min3.0Mpa | .80m³/min3.0Mpa |
LP air compressor | 1.0m³/min1.0Mpa | 1.6m³/min1.0Mpa | 2.0m³/min1.0Mpa | 3.0m³/min1.0Mpa | |
Air tank | 0.6m³3.0Mpa | 0.6m³3.0Mpa | 1.0m³3.0Mpa | 1.6m³3.0Mpa | |
Air dryer | 1.0m³/min3.0Mpa | 2.0m³/min3.0Mpa | 6.0m³/min3.0Mpa | 6.0m³/min3.0Mpa | |
Cooling water | Water Chiller | 3HP | 3HP | 5HP | 8HP |
Machine | Size(L*W*H) | 1900*1280*1930mm | 1900*1860*1930mm | 4100*1400*1800mm | 4100*2200*1800mm |
Weight | 2000kg | 3200kg | 3600kg | 5800kg |
The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement,
equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.
Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30%
electricity consumption.
Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.
By rotary and soft preform inlet system, the speed of preform feeding is ensured meanwhile, the preform neck is well protected.